Category: Self-Contained Heater Trailers
|Heat Capacity||750,000 btuh|
Both models feature a primer and powder-coated finish, are DOT approved and include all signal and marker lights.
The FVNP trailer has a single axle with 15" rims and radials.
The FVO trailer has a dual axle with 15" rims and radials and includes second axle brakes. On-board 180 US gallon tank with 110% containment is included. FVO has a 30-hour run time at constant fire with no thermostat, a Tiger Loop fuel draw and priming systems standard, a 4" C-Channel framed to protect the fuel tank and a 4" spout with anti-splash insert.
FVO and FVNP heaters feature a 130º F temperature rise at 7,000 cfm, created by reverse inclined blower. They are ductable up to 200 ft. and equipped with VFD controls, allowing for a soft start, which regulates fan speed, power and power draw on start up or shut down. 1 phase and 3 phase, 208-230V power supply connections are standard and both models are equipped with dual 16" inlets and outlets.
The proven Flagro heat exchanger design includes fully welded, 16 g 304 stainless steel.
Printable Spec Sheet
|OIl||Dual Fuel - LP/NG|
|Heat Capacity||750,000 btuh||750,000 btuh|
|Temperature Rise||130º F||130º F|
|Heat Exchanger||16 gauge, 304 Stainless Steel||16 gauge, 304 Stainless Steel|
|Fan Motor||7.5 hp||7.5 hp|
|CFM||7,000 ctm||7,000 ctm|
|Fan Control||VFD Standard||VFD Standard|
|Ignition||Direct Spark Ignition||Direct Spark Ignition|
|Nozzle Size / Gas Pressure||4.5x60W @ 160 psi||Propane - 1.5" W.C.
Natural Gas - 2.2" W.C.
|Air Outlet||Two 16" diameter||Two 16" diameter|
|Air Inlet||Two 16" diameter||Two 16" diameter|
|Power Requirement||1 ph/208-230v
|Amperage Draw||18 amp @ 1ph||18 amp @ 1ph|
|14 amp @ 3ph||14 amp @ 3ph|
|Weight||2,980 lb||1,900 lb|
Copyright © 2018 - Heater Sales and Service